Cod Ean8595568934734
Cod vamal39259020
Greutate0,89 kg/m
Culoarewhite
MaterialHF
Material fără halogeniyes
Material fără plumbyes
Cu suto-stingere30 s
Rezistența la temperatură-25 - 90 °C
Testat cu buclă incinsă850 °C
Protectie mecanicăIK07
Rezistență la impact1 J
Antibacterialyes
Lătime110 mm
Înăltime67,5 mm
Lungime2 m
Zona interioară5500 mm2
Toleranță
The trunkings are available in lengths with a tolerance of ± 0.5% at 20 ° C.
Utilizare
they are resistant to aggressive and chemical environments. They do not resist UV radiation, they are not suitable for outdoor use.
Recomandările producătorului
If the SK 40X33 (higher) shielding canal can be installed, it is not possible to use instruments with a larger installation depth, eg with an overvoltage protection device. The producer recommends checking the depth of a particular device before installation. To install devices with very round corners, KOPOS recommends using of the KP PK HF instrument box and drilling the hole in the lid using the VPT 64 drill.
Zonă cu pericol de explozie
Electro-installation trunking (insertive, rectangular, halogen-free) and parapet canals with accesories can be installed in zones with explosion hazard of flammable gases (zone 2) and with the risk of explosion of flammable dusts (zone 22), installation must comply with EN 60079-14.
Clasa de reacţie la foc a materialului de fondA1 - F
Tipuri de protecțieIP 40
StandardeČSN EN 50 085-1
Standardele cu privire lade rezistența la focČSN 73 0895, DIN 4102-12, STN 92 0205
Descriere impachetarepackage - cardboard
Cu folie de protecţieyes

Designed for inserting power and communication circuits, security lines and other lines. Individual lines can be electromagnetically shielded by inserting a shielding canal, which is fixed to the trunking by clamps PSK 1. For classical instruments that are installed in a closed instrument box KP 80 PK HF clicked in the body of the canal or into an open instrument box KP PK HF installed in the bottom of the parapet trunkings. With using KOPOBOX MINI P, modular devices can be installed. There is no need to use any covers for the final installation of instrument. The lid is cut to the desired length and inserted next to the instrument.